Introduction to Hugo Templating
Go Templates provide an extremely simple template language that adheres to the belief that only the most basic of logic belongs in the template or view layer.
Basic Syntax
Go Templates are HTML files with the addition of variables and functions. Go Template variables and functions are accessible within {{ }}.
Access a Predefined Variable
A predefined variable could be a variable already existing in the
current scope (like the .Title example in the Variables section below) or a custom variable (like the
$address example in that same section).
{{ .Title }}
{{ $address }}Parameters for functions are separated using spaces. The general syntax is:
{{ FUNCTION ARG1 ARG2 .. }}
The following example calls the add function with inputs of 1 and 2:
{{ add 1 2 }}Methods and Fields are Accessed via dot Notation
Accessing the Page Parameter bar defined in a piece of content’s front matter.
{{ .Params.bar }}Parentheses Can be Used to Group Items Together
{{ if or (isset .Params "alt") (isset .Params "caption") }} Caption {{ end }}Variables
Each Go Template gets a data object. In Hugo, each template is passed
a Page. In the below example, .Title is one of the elements
accessible in that Page variable.
With the Page being the default scope of a template, the Title
element in current scope (. – “the dot”) is accessible simply
by the dot-prefix (.Title):
<title>{{ .Title }}</title>Values can also be stored in custom variables and referenced later:
{{ $address := "123 Main St." }}
{{ $address }}For Hugo v0.48 and newer, variables can be re-defined using the
new = operator (new in Go 1.11).
Below example will work only in these newer Hugo versions. The example prints “Var is Hugo Home” on the home page, and “Var is Hugo Page” on all other pages:
{{ $var := "Hugo Page" }}
{{ if .IsHome }}
{{ $var = "Hugo Home" }}
{{ end }}
Var is {{ $var }}Functions
Go Templates only ship with a few basic functions but also provide a mechanism for applications to extend the original set.
Hugo template functions provide additional functionality specific to building websites. Functions are called by using their name followed by the required parameters separated by spaces. Template functions cannot be added without recompiling Hugo.
Example 1: Adding Numbers
{{ add 1 2 }}
<!-- prints 3 -->Example 2: Comparing Numbers
{{ lt 1 2 }}
<!-- prints true (i.e., since 1 is less than 2) -->Note that both examples make use of Go Template’s math functions.
Includes
When including another template, you will need to pass it the data that it would need to access.
The templates location will always be starting at the layouts/ directory
within Hugo.
Partial
The partial function is used to include partial templates using
the syntax {{ partial "<PATH>/<PARTIAL>.<EXTENSION>" . }}.
Example of including a layouts/partials/header.html partial:
{{ partial "header.html" . }}Template
The template function was used to include partial templates
in much older Hugo versions. Now it useful only for calling
internal templates. The syntax is {{ template
"_internal/<TEMPLATE>.<EXTENSION>" . }}.
Example of including the internal opengraph.html template:
{{ template "_internal/opengraph.html" . }}Logic
Go Templates provide the most basic iteration and conditional logic.
Iteration
The Go Templates make heavy use of range to iterate over a map,
array, or slice. The following are different examples of how to
use range.
Example 1: Using Context (.)
{{ range $array }}
{{ . }} <!-- The . represents an element in $array -->
{{ end }}Example 2: Declaring a variable name for an array element’s value
{{ range $elem_val := $array }}
{{ $elem_val }}
{{ end }}Example 3: Declaring variable names for an array element’s index and value
For an array or slice, the first declared variable will map to each element’s index.
{{ range $elem_index, $elem_val := $array }}
{{ $elem_index }} -- {{ $elem_val }}
{{ end }}Example 4: Declaring variable names for a map element’s key and value
For a map, the first declared variable will map to each map element’s key.
{{ range $elem_key, $elem_val := $map }}
{{ $elem_key }} -- {{ $elem_val }}
{{ end }}Conditionals
if, else, with, or, and and provide the framework for handling conditional logic in Go Templates. Like range, each statement is closed with an {{ end }}.
Go Templates treat the following values as false:
false(boolean)- 0 (integer)
- any zero-length array, slice, map, or string
Example 1: with
It is common to write “if something exists, do this” kind of
statements using with.
It skips the block if the variable is absent, or if it evaluates to “false” as explained above.
{{ with .Params.title }}
<h4>{{ . }}</h4>
{{ end }}Example 2: with .. else
Below snippet uses the “description” front-matter parameter’s value if
set, else uses the default .Summary Page variable:
{{ with .Param "description" }}
{{ . }}
{{ else }}
{{ .Summary }}
{{ end }}See the .Param function.
Example 3: if
An alternative (and a more verbose) way of writing with is using
if. Here, the . does not get rebinded.
Below example is “Example 1” rewritten using if:
{{ if isset .Params "title" }}
<h4>{{ index .Params "title" }}</h4>
{{ end }}Example 4: if .. else
Below example is “Example 2” rewritten using if .. else, and using
isset function + .Params variable (different from the
.Param function) instead:
{{ if (isset .Params "description") }}
{{ index .Params "description" }}
{{ else }}
{{ .Summary }}
{{ end }}Example 5: if .. else if .. else
Unlike with, if can contain else if clauses too.
{{ if (isset .Params "description") }}
{{ index .Params "description" }}
{{ else if (isset .Params "summary") }}
{{ index .Params "summary" }}
{{ else }}
{{ .Summary }}
{{ end }}Example 6: and & or
{{ if (and (or (isset .Params "title") (isset .Params "caption")) (isset .Params "attr")) }}Pipes
One of the most powerful components of Go Templates is the ability to stack actions one after another. This is done by using pipes. Borrowed from Unix pipes, the concept is simple: each pipeline’s output becomes the input of the following pipe.
Because of the very simple syntax of Go Templates, the pipe is essential to being able to chain together function calls. One limitation of the pipes is that they can only work with a single value and that value becomes the last parameter of the next pipeline.
A few simple examples should help convey how to use the pipe.
Example 1: shuffle
The following two examples are functionally the same:
{{ shuffle (seq 1 5) }}{{ (seq 1 5) | shuffle }}Example 2: index
The following accesses the page parameter called “disqus_url” and escapes the HTML. This example also uses the index function, which is built into Go Templates:
{{ index .Params "disqus_url" | html }}Example 3: or with isset
{{ if or (or (isset .Params "title") (isset .Params "caption")) (isset .Params "attr") }}
Stuff Here
{{ end }}Could be rewritten as
{{ if isset .Params "caption" | or isset .Params "title" | or isset .Params "attr" }}
Stuff Here
{{ end }}Example 4: Internet Explorer Conditional Comments
By default, Go Templates remove HTML comments from output. This has the unfortunate side effect of removing Internet Explorer conditional comments. As a workaround, use something like this:
{{ "<!--[if lt IE 9]>" | safeHTML }}
<script src="html5shiv.js"></script>
{{ "<![endif]-->" | safeHTML }}Alternatively, you can use the backtick (`) to quote the IE conditional comments, avoiding the tedious task of escaping every double quotes (") inside, as demonstrated in the examples in the Go text/template documentation:
{{ `<!--[if lt IE 7]><html class="no-js lt-ie9 lt-ie8 lt-ie7"><![endif]-->` | safeHTML }}Context (aka “the dot”)
The most easily overlooked concept to understand about Go Templates is
that {{ . }} always refers to the current context.
- In the top level of your template, this will be the data set made available to it.
- Inside of an iteration, however, it will have the value of the
current item in the loop; i.e.,
{{ . }}will no longer refer to the data available to the entire page.
If you need to access page-level data (e.g., page params set in front matter) from within the loop, you will likely want to do one of the following:
1. Define a Variable Independent of Context
The following shows how to define a variable independent of the context.
{{ $title := .Site.Title }}
<ul>
{{ range .Params.tags }}
<li>
<a href="/tags/{{ . | urlize }}">{{ . }}</a>
- {{ $title }}
</li>
{{ end }}
</ul>
2. Use $. to Access the Global Context
$ has special significance in your templates. $ is set to the starting value of . (“the dot”) by default. This is a documented feature of Go text/template. This means you have access to the global context from anywhere. Here is an equivalent example of the preceding code block but now using $ to grab .Site.Title from the global context:
<ul>
{{ range .Params.tags }}
<li>
<a href="/tags/{{ . | urlize }}">{{ . }}</a>
- {{ $.Site.Title }}
</li>
{{ end }}
</ul>
Whitespace
Go 1.6 includes the ability to trim the whitespace from either side of a Go tag by including a hyphen (-) and space immediately beside the corresponding {{ or }} delimiter.
For instance, the following Go Template will include the newlines and horizontal tab in its HTML output:
<div>
{{ .Title }}
</div>Which will output:
<div>
Hello, World!
</div>Leveraging the - in the following example will remove the extra white space surrounding the .Title variable and remove the newline:
<div>
{{- .Title -}}
</div>Which then outputs:
<div>Hello, World!</div>Go considers the following characters whitespace:
- space
- horizontal tab
- carriage return
- newline
Comments
In order to keep your templates organized and share information throughout your team, you may want to add comments to your templates. There are two ways to do that with Hugo.
Go Templates comments
Go Templates support {{/* and */}} to open and close a comment block. Nothing within that block will be rendered.
For example:
Bonsoir, {{/* {{ add 0 + 2 }} */}}Eliott.Will render Bonsoir, Eliott., and not care about the syntax error (add 0 + 2) in the comment block.
HTML comments
If you need to produce HTML comments from your templates, take a look at the Internet Explorer conditional comments example. If you need variables to construct such HTML comments, just pipe printf to safeHTML. For example:
{{ printf "<!-- Our website is named: %s -->" .Site.Title | safeHTML }}HTML comments containing Go Templates
HTML comments are by default stripped, but their content is still evaluated. That means that although the HTML comment will never render any content to the final HTML pages, code contained within the comment may fail the build process.
<!-- {{ $author := "Emma Goldman" }} was a great woman. -->
{{ $author }}The templating engine will strip the content within the HTML comment, but will first evaluate any Go Template code if present within. So the above example will render Emma Goldman, as the $author variable got evaluated in the HTML comment. But the build would have failed if that code in the HTML comment had an error.
Hugo Parameters
Hugo provides the option of passing values to your template layer through your site configuration (i.e. for site-wide values) or through the metadata of each specific piece of content (i.e. the front matter). You can define any values of any type and use them however you want in your templates, as long as the values are supported by the front matter format specified via metaDataFormat in your configuration file.
Use Content (Page) Parameters
You can provide variables to be used by templates in individual content’s front matter.
An example of this is used in the Hugo docs. Most of the pages benefit from having the table of contents provided, but sometimes the table of contents doesn’t make a lot of sense. We’ve defined a notoc variable in our front matter that will prevent a table of contents from rendering when specifically set to true.
Here is the example front matter (YAML):
---
title: Roadmap
lastmod: 2017-03-05
date: 2013-11-18
notoc: true
---
Here is an example of corresponding code that could be used inside a toc.html partial template:
{{ if not .Params.notoc }}
<aside>
<header>
<a href="#{{.Title | urlize}}">
<h3>{{.Title}}</h3>
</a>
</header>
{{.TableOfContents}}
</aside>
<a href="#" id="toc-toggle"></a>
{{ end }}
We want the default behavior to be for pages to include a TOC unless otherwise specified. This template checks to make sure that the notoc: field in this page’s front matter is not true.
Use Site Configuration Parameters
You can arbitrarily define as many site-level parameters as you want in your site’s configuration file. These parameters are globally available in your templates.
For instance, you might declare the following:
params:
copyrighthtml: Copyright © 2017 John Doe. All Rights Reserved.
sidebarrecentlimit: 5
twitteruser: spf13
[params]
copyrighthtml = "Copyright © 2017 John Doe. All Rights Reserved."
sidebarrecentlimit = 5
twitteruser = "spf13"
{
"params": {
"copyrighthtml": "Copyright \u0026#xA9; 2017 John Doe. All Rights Reserved.",
"sidebarrecentlimit": 5,
"twitteruser": "spf13"
}
}
Within a footer layout, you might then declare a <footer> that is only rendered if the copyrighthtml parameter is provided. If it is provided, you will then need to declare the string is safe to use via the safeHTML function so that the HTML entity is not escaped again. This would let you easily update just your top-level config file each January 1st, instead of hunting through your templates.
{{ if .Site.Params.copyrighthtml }}
<footer>
<div class="text-center">{{.Site.Params.CopyrightHTML | safeHTML}}</div>
</footer>
{{ end }}An alternative way of writing the “if” and then referencing the same value is to use with instead. with rebinds the context (.) within its scope and skips the block if the variable is absent:
{{ with .Site.Params.twitteruser }}
<div>
<a href="https://twitter.com/{{.}}" rel="author">
<img src="/images/twitter.png" width="48" height="48" title="Twitter: {{.}}" alt="Twitter"></a>
</div>
{{ end }}
Finally, you can pull “magic constants” out of your layouts as well. The following uses the first function, as well as the .RelPermalink page variable and the .Site.Pages site variable.
<nav>
<h1>Recent Posts</h1>
<ul>
{{- range first .Site.Params.SidebarRecentLimit .Site.Pages -}}
<li><a href="{{.RelPermalink}}">{{.Title}}</a></li>
{{- end -}}
</ul>
</nav>Example: Show Only Upcoming Events
Go allows you to do more than what’s shown here. Using Hugo’s where function and Go built-ins, we can list only the items from content/events/ whose date (set in a content file’s front matter) is in the future. The following is an example partial template:
<h4>Upcoming Events</h4>
<ul class="upcoming-events">
{{ range where .Pages.ByDate "Section" "events" }}
{{ if ge .Date.Unix now.Unix }}
<li>
<!-- add span for event type -->
<span>{{ .Type | title }} —</span>
{{ .Title }} on
<!-- add span for event date -->
<span>{{ .Date.Format "2 January at 3:04pm" }}</span>
at {{ .Params.place }}
</li>
{{ end }}
{{ end }}
</ul>